Software for Short Wave Listeners
This web page is used to make some software, which
I, Gerd Niephaus, have written to support short wave listening, available
to the public. You can contact me via email:
Ten-Tec RX-320 Receiver Control Program GNRX320
The program GNRX320 is intended to operate the Ten-Tec
RX-320 receiver. The program requires Microsoft Windows 95, 98, ME, NT,
2000 or XP; it will not work with Windows 3.11 or DOS.
In order to simplify tuning to broadcast and utility
stations, the program GNRX320 has a link to the ILGRadio database program
GNPDB and to the Klingenfuss "Super Frequency List" CD via the program
GNKFDB.
Description and download of
GNRX320
Siemens CHR-531Receiver Control Program GNCHR
The program GNCHR is a control program for the Siemens
CHR-531 receiver. The program requires Microsoft Windows 95, 98, ME, NT,
2000 or XP; it will not work with Windows 3.11 or DOS.
The program will only work if the serial interface
hardware option is installed in the receiver.
Please contact me if you are interested in this program.
Download of the pdf user manual
(in German)
ILGRadio Broadcast Database Program
GNPDB
The program GNPDB is intended to display the ILGRadio
broadcast database. The program requires Microsoft Windows 95, 98, ME,
NT, 2000 or XP; it will not work with Windows 3.11 or DOS.
The program GNPDB can either be used as a standalone
broadcast database display or in conjunction with the receiver control
program GNRX320 or GNCHR.
Description and download of GNPDB
Klingenfuss Database Link Program GNKFDB
The program GNKFDB links the Klingenfuss database "Super
Frequency List" to a suitable receiver control program (e.g. GNRX320 for
the Ten-Tec RX-320 receiver or GNCHR for the Siemens CHR-531 receiver).
The program requires Microsoft Windows 95, 98, ME, NT, 2000 or XP; it will
not work with Windows 3.11 or DOS.
GNKFDB is only useful if a suitable receiver control
program
and the Klingenfuss database program "Super Frequency List"
are installed.
Description and download of
GNKFDB
Experimental DSP based Audio Signal Processor
The program GNASP1 is an experimental version of a DSP
based audio signal processor. The program requires Microsoft Windows 95,
98, ME, NT, 2000 or XP; it will not work with Windows 3.11 or DOS.
The program requires a sound card. A full duplex
driver (i.e. a driver which allows simultaneous input and output) for
this sound card must be installed.
Description
and download of GNASP1
If you are interested in "Boatanchors" (i.e. tube-based
communications receivers), see the website www.boatanchors.de
.
Last modification: 03/13/2006
provided by
Net
Digits